The PowerDash Pet Hard Floor Cleaner is safe to use on all sealed hard floors including hardwoods, tile, laminate, vinyl, linoleum, porcelain, marble, bamboo, concrete, stone, etc.
We designed the PowerDash Pet Hard Floor Cleaner specifically for hard floor surfaces. We do not recommend using on carpet or area rugs.
The PowerDash Pet Hard Floor Cleaner uses powerful SpinScrub brushes and a fast-drying system to wash and dry your floors for you. Once the PowerDash Pet Hard Floor cleaner is turned on and in the reclined position, squeeze the trigger to dispense clean water and solution, push forward to wash and scrub your floors clean. Let go of the trigger, stopping the clean water and solution from dispensing, then pull back over the freshly washed path to suction up the dirty water left on the floor. Continue with this rhythm until all desired hard floors are cleaned.
The PowerDash Pet Hard Floor Cleaner uses 360 degree counter-rotating SpinScrub Brushes that scrub away messes and wash hard floors for you.
While the Hard Floor Cleaner is turned on, the fast-drying system is continuously working to minimize the amount of water left on your floors. This system includes a front wiper that gently squeegees any excess water off your floors, combined with powerful suction that captures dirty water and sends it straight to the dirty water tank.
We recommend using our Hoover Multi-Surface solutions, including our Renewal, Paws & Claws, Hardwood, and Tile & Grout formulas.
For easy measuring, the Clean Water Tank cap also acts as a measuring cap when mixing solution and water. Fill the cap with solution until it reaches the “MAX” line indicated on the cap. Exact measurements are 3oz of solution to 1 Liter of water.
1. Once you’re done cleaning, turn the product off, and remove both the Clean and Dirty Water Tanks, emptying contents and rinsing with water. Then leave out to dry before placing back onto the product. 2. Next remove the nozzle cover by pulling on the "pull to release" tab. Rinse and allow to dry before replacing on unit. 3. Finally, remove the SpinScrub Brushes by keeping the unit in the upright position, with both hands pull on the "brush release tabs" to disengage the brush block, dropping it to the floor. Move or lean unit over to grab brush block, rinse and remove any debris before replacing back onto unit.
13 lbs when tanks are empty.
Yes, the PowerDash Pet Hard Floor Cleaner has a 2 year limited warranty. If you're having problems with your unit please visit the product page on Hooover.com for how to videos or call Customer Service at 1-800-944-9200.
The PowerDash Pet Hard Floor cleaner dispenses water and solution, with its powerful suction designed for suctioning liquid messes back into the Dirty Water Tank. It should not replace your vacuum or method for picking up dry debris.
No, the PowerDash Pet Hard Floor Cleaner uses SpinScrub Brushes that are tough on messes, not your floors.
The PowerDash Pet Hard Floor Cleaner has Antimicrobial protection on its SpinScrub brushes. The combination makes for powerful brushes that pick up messes pets leave behind while stopping odors before they build up.
The solution and clean water both go into the Clean Water Tank. The Clean Water Tank cap also acts as a solution measuring cap to easily add your Hoover Multi-Surface solution into the tank.
We recommend using our Hoover Multi-Surface solutions, including our Renewal, Paws & Claws, Hardwood, and Tile & Grout formulas.To maintain your PowerDash Pet Hard Floor Cleaner we do not recommend adding Bleach, essential oils, multi-purpose hand spray cleaners, or other multi-purpose cleaners not designed to be used in a machine.
We recommend using the PowerDash Pet Hard Floor Cleaner with one of our Hoover Solutions to get the best cleaning performance when tackling messes.
We recommend using warm water when possible, but either hot or cold water can be used.
First remove the SpinScrub Brushes by keeping the unit in the upright position, with both hands pull on the "brush release tabs" to disengage the brush block, dropping it to the floor. Move or lean unit over to grab brush block, rinse and remove any debris before replacing back onto unit.
Turn the product off, then remove both the Clean and Dirty Water Tanks by pressing down on the latches and pulling away from the product. Empty any leftover contents in the sink, tub, or your preferred disposal location. Rinse both tanks with water and leave out to dry before replacing back onto the unit. If build up occurs, scrub tanks with mild detergent and water and leave out to dry.
We recommend cleaning the Clean and Dirty Water Tank after every use to keep parts in the best condition for your next clean. If noticeable messes are left on the nozzle cover and SpinScrub Brushes, then we also recommend cleaning after you’re done cleaning as well.
Yes, to get the best performance when cleaning stuck on messes we recommend picking up any loose debris before hand with a vacuum or your usual dry debris pick method.
Yes, using the PowerDash Pet Hard Floor cleaner allows you to easily move between different floor types and from room to room.
Depending on the model purchased, the PowerDash Pet Hard Floor has a 20-25ft cord.
No, we do not recommend putting any machine parts in the dishwasher.
Yes, there are spare parts for purchase on Hoover.com under the PowerDash Pet Hard Floor product page.
The PowerDash Pet Hard Floor filter only needs to be replaced if lost or damaged.
Great places to store your PowerDash Pet Hard Floor Cleaner are on sealed hard floor surfaces in closets, laundry rooms, garages, and other storage spaces.